132kv Station Post Composite Insulators for Transmission and Distribution Line

Model NO.: FXZZ-132/4.5
Size of Bearing Capacity: 6kn
Certification: ISO9001
Color: Grey
Brand: Hivolt
Rated Voltage: 10-252kv
Specified Cantilever Load: 4-12.5kn
Impulse Withstand Voltage: 95-1050kv
Shed Diameter: 140-222mm
Trademark: Hivolt
Transport Package: Wooden Pallet
Specification: 5kg
Origin: China
Model NO.: FXZZ-132/4.5
Size of Bearing Capacity: 6kn
Certification: ISO9001
Color: Grey
Brand: Hivolt
Rated Voltage: 10-252kv
Specified Cantilever Load: 4-12.5kn
Impulse Withstand Voltage: 95-1050kv
Shed Diameter: 140-222mm
Trademark: Hivolt
Transport Package: Wooden Pallet
Specification: 5kg
Origin: China

132kv Station Post Composite Insulators for Transmission and Distribution Line

We supply high quality station post composite insulator according to IEC standards, ANSI standard etc.

The composite shed colour can be light gray or red.

We can also design composite insulators according to customers specfications.

132kv Station Post Composite Insulators for Transmission and Distribution Line

We supply high quality station post composite insulator according to IEC standards, ANSI standard etc.

The composite shed colour can be light gray or red.

We can also design composite insulators according to customers specfications.

Backlight Power Meter Socket

WARNING!

Do not plug two or more meters together!

IMPORTANT

Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.

KEYBOARD DEFINITION

1). SET: Set price with button UP.

2). MODE: Exchange display state.

3). UP: Set price combined with button SET.

GENERAL FEATURES

1).Display line power.

2).Display and memory accumulative total power quantity.

3).Display and memory total power charge of price.

THE DATA DISPLAY

Press MODE button the data displays as follows:

W →KWh →PRICE →COST/KWH

↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓

1). Plug in socket and power on, the meter will display real power.

2). Press MODE button once again and release, the meter will display accumulative KWh.

3). Press MODE button once again and release, the meter will display total power charge.

4). Press MODE button once again and release, the meter will display COST/KWH.

SETTING PRICE OF COST/KWH

1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.

2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.

3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.

4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.

5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.

DATA CLEAR

Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.

Power Meter Plug Energy Monitor,Backlight Power Metering Socket,Blue Backlight Power Meter Socket,Multi-functional Backlight Power Meter Socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com

This entry was posted in on