High Speed Engineering Plastic Cable Carrier

Plastic drag chain
Basic parameters 

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:

Picture




 
Advantages

1. It has very nicelooking appearance and has very rationalconstruction and flexible and high strength. It is reliable and easy to operate, install, dismantle or assemble. It is worthwhile mentioning that the antiwearing performance has been improvedgreatlydue to wear resistent material and alloy pin-shaft are used.
 
2. The product is flexible to bending and has low resistance, giving low noises. It can be used for a very long period of time without any deforming or hanging down.
 
3. The product is nicelooking, which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.
 
Feature
 
The feature of the Engineering Plastic Roller Chain Cable Drag Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).
 
Application
 
The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.

Installation 

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

Order
 
Kindly please advise the below:
 
1. Length: 
2. Cable or pipe Max. Dia.:
3. Supporting board type:
 
4. Bending Radius(or the curved height ): Plastic drag chain
Basic parameters 

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:

Picture




 
Advantages

1. It has very nicelooking appearance and has very rationalconstruction and flexible and high strength. It is reliable and easy to operate, install, dismantle or assemble. It is worthwhile mentioning that the antiwearing performance has been improvedgreatlydue to wear resistent material and alloy pin-shaft are used.
 
2. The product is flexible to bending and has low resistance, giving low noises. It can be used for a very long period of time without any deforming or hanging down.
 
3. The product is nicelooking, which makes the machine tool unit nicer looking as a whole and makes the machine tools and machineries more competitive in the international market.
 
Feature
 
The feature of the Engineering Plastic Roller Chain Cable Drag Chain:
1.The drag chain can adapt to max. Moving speed of 40m/sec.
2.When at the max moving speed, the sound pressure of noises shall not be greater than 68 db.
3.The service life of the drag chain shall not be less than 1 million times(reciprocating).
 
Application
 
The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.

Installation 

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

Order
 
Kindly please advise the below:
 
1. Length: 
2. Cable or pipe Max. Dia.:
3. Supporting board type:
 
4. Bending Radius(or the curved height ):

LED Cob Street Light
All in one COB street lamp--Light sensor (automatically turn on at dusk, turn off at dawn )+ PIR motion sensor + Remote controlled
Long Working Time and Quick Charging: working over 20 Hours (DIM MODE) after full charged (6-8 hours charging time). 120 degree lighting angle. Motion Distance: Approx. 16-23ft
LED COB street lamp Easy installation--No wires, Battery and Mounting hardware is included in package. This solar street lamp can be mounted onto wall or pole easily. (Recommended pole diameter: 2-2.6inch, Recommended fixed height: 8.2ft-11.4ft )
Two year warranty guarantee-- COB street light LED comes with IP65 waterproof rating and high quality ABS material. Durable, Long lifespan, Buy with confidence.

LED COB Street Light

LED Cob Street Light,LED Outdoor Street Light,Ongue Shape Street Light,Outdoor Street Light

Huizhou Youtech Light Industrail Co., LTD. , http://www.youtechlight.com