Professor Elisabeth Holder of the University of Wuppertal in Germany and his colleagues, together with Professor Hilmi Volkan Demir of the University of AnkaraBilkent in Turkey, recently presented the world's first white LEDs that achieve high color rendering index.
Traditional LEDs can only emit one wavelength per wave. Therefore, the only way to obtain white light from an LED is to put the red, green, and blue LEDs together, letting the yellow light enter the blue LED lens or convert it into a new material such as zinc selenide, while emitting blue light from its active area. The bottom layer glows yellow. These methods can emit white light and are therefore suitable for general illumination, but the Color Rendering Index (CRI) test found that these methods are not suitable for professionals who need to be able to reproduce all colors in the visible spectrum.
Researchers say the key to this new technology is to embed the inorganic luminescent nanoparticles into a highly fluorescent organic polymeric substrate, which is then extracted as a near-ultraviolet LED to form a hybrid organic/inorganic LED that produces white light. This white light includes almost all wavelengths, so it can accurately display almost any color.
The research team's focus is on combining organic and inorganic materials. By using a layer-by-layer approach, researchers can embed fluorescent yellow, green, and red nanoparticles (in cadmium-selenium with galvanized silicon) into a fluorescent blue organic matrix, and thus adjust the mixture to achieve more than 80 colors. The index is shown (daylight is 100, incandescent light is 90, fluorescence-based LEDs and 65 nanometers are fluorescent tubes. After further optimization, these researchers are expected to increase CRI to 100).
? ROHM developed a dimmable LED lighting driver (Photos) 2008-03-07
? Energy-saving emission reduction into two hotspots related to lighting dynamic highlights 2008-03-07
? The rising tide in 2008 continues to affect the lighting industry 2008-03-06
? Long-term energy saving with LED lighting (Figure) 2008-03-06
LED application status and bottleneck analysis of urban lighting 2008-03-06
? Op Lighting Ma Xiuhui can help me to work for me. 2008-03-06
? Skilled Tianlong eight achievements lighting purchase martial arts master 2008-03-06
? Industry experts explain the bottleneck of large-scale commercial use of LED street lamps 2008-03-06
1
Description
-Contact Resistance:≤50mΩ
-Insulation Resistance:≥100mΩ
-Dielectric Strength:1,500V,
-1min Electronic Life:10,000 cycles
-Operating temperature:T120
-Rating current/voltage:6A 250V AC
Features
â—† Small Compact Size, high reliability
â—† Micro contact gap,High speed operation,High sensitirity,Micro operatizon travel.
â—† Long life & high reliability
Rotating Switch,Rotary On Off Switch,Rotary Power Switch,Round Rotary Switch
Ningbo Jialin Electronics Co.,Ltd , https://www.donghai-switch.com