Qualcomm has released a new generation of mid-range mobile platforms, the Snapdragon 660. Due to its adoption of 14nm technology, the Kryo 260 architecture and 8-core design have attracted considerable attention. Recently, the Xiaolong 660 GeekBench running points have also been exposed, in which the single-threaded running points 1609, multi-threaded running points 5643, single-core performance and the previous generation of flagship Qualcomm Xiaolong 820 comparable, multi-core has a certain degree of lead.
According to GeekBench's data, it does not provide specific models of this Xiaolong 660 model, the system is Android 7.1.1, single-thread running is divided into 1609, and multi-threaded running is divided into 5643. It must be admitted that the single-threaded aspect of the Snapdragon 660 has reached the level of the previous generation flagship Snapdragon 820, and multi-threaded aspects, due to the high-pass Snapdragon 660's 8-core design, running points higher than Snapdragon 820.
The Snapdragon 660 adopts 14nm technology, Kryo 260 architecture, Adreno 512GPU, X12 LTE modem and Hexgon DSP. It supports dual-camera ISP and is the strongest mid-range mobile platform that Qualcomm has created. It will succeed Xiaolong 653. According to the latest news, Xiaolong 660 has completed shipments, OPPO R11 will become its first model.
WARNING!
Do not plug two or more meters together!
IMPORTANT
Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.
KEYBOARD DEFINITION
1). SET: Set price with button UP.
2). MODE: Exchange display state.
3). UP: Set price combined with button SET.
GENERAL FEATURES
1).Display line power.
2).Display and memory accumulative total power quantity.
3).Display and memory total power charge of price.
THE DATA DISPLAY
Press MODE button the data displays as follows:
W →KWh →PRICE →COST/KWH
↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓
1). Plug in socket and power on, the meter will display real power.
2). Press MODE button once again and release, the meter will display accumulative KWh.
3). Press MODE button once again and release, the meter will display total power charge.
4). Press MODE button once again and release, the meter will display COST/KWH.
SETTING PRICE OF COST/KWH
1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.
2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.
3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.
4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.
5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.
DATA CLEAR
Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.
Power Backlit, Backlit socket, power meter Backlit, energy meter Backlit, backlit adaptor, backlit plug socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com