[Text|High-tech LED reporter Long Zonghui] In recent years, " modularization " has become one of the most popular keywords in LED applications. Previous integrated streetlights were unable to meet customer demand for replaceability and maintainability. With the replacement speed of the domestic street lamp market not meeting expectations this year, the competition for cost of various LED street lamp manufacturers has become increasingly fierce.
Since the industry has consistently identified the LED street lamp driving power supply as the most vulnerable part, the easy replacement of the power supply has basically reached a consensus in the industry. Xu Min, technical director of Shanxi Guangyu, believes that the modularization of light source should be the direction of future development of street lighting technology. LED street lights can be divided into two types according to the form of replaceable light source modules: one is a light source module without heat dissipation function, including a COB light source and a light bar scheme (multiple light sources are soldered on an aluminum substrate, and may or may not have a lens With a lens); the second is a light source module with its own heat dissipation function.
As an outdoor LED street light, it must be exposed to the sun for a long time. The objective and harsh use environment such as alternating heat and cold, air pollution, etc. all generate the market demand for modular solutions. In the light source module solution with self-heating, everyone directly exposes the lens made of polymer material to sunlight, and the module uses silicone to seal. The cable connected by the module is also directly exposed to sunlight, and ultraviolet rays. Prolonged exposure to these materials can have a significant impact on the performance of these materials, such as lens yellowing, silica gel deterioration leading to reduced sealing performance, wire aging, and the like.
Therefore, manufacturers should pay close attention to these issues in their own solutions. The light source module solution without heat dissipation, because the light source is protected in a complete body, without lenses, wires and the like directly exposed to the sunlight, the reliability of the design scheme is slightly better.
As the industry's highest specification and largest industry event in the LED industry, it is also the best platform for the annual LED industry's year-end review, analysis and outlook. So far, the high-tech LED conference has been successfully held for four sessions. The 5th High-tech LED Conference will also be held at the Guanlan Lake Dongguan Club in Shenzhen on December 12-13, 2014.
On the afternoon of December 13th, Mr. Mu Linsen’s “New LED for the Next Three Years†theme conference , Xu Min , technical director of Shanxi Guangyu, will analyze the advantages and disadvantages of various modularization solutions and discuss the same module. Please look forward to the various technical problems and solutions in the process of light source to diversified lamps .
Since the industry has consistently identified the LED street lamp driving power supply as the most vulnerable part, the easy replacement of the power supply has basically reached a consensus in the industry. Xu Min, technical director of Shanxi Guangyu, believes that the modularization of light source should be the direction of future development of street lighting technology. LED street lights can be divided into two types according to the form of replaceable light source modules: one is a light source module without heat dissipation function, including a COB light source and a light bar scheme (multiple light sources are soldered on an aluminum substrate, and may or may not have a lens With a lens); the second is a light source module with its own heat dissipation function.
As an outdoor LED street light, it must be exposed to the sun for a long time. The objective and harsh use environment such as alternating heat and cold, air pollution, etc. all generate the market demand for modular solutions. In the light source module solution with self-heating, everyone directly exposes the lens made of polymer material to sunlight, and the module uses silicone to seal. The cable connected by the module is also directly exposed to sunlight, and ultraviolet rays. Prolonged exposure to these materials can have a significant impact on the performance of these materials, such as lens yellowing, silica gel deterioration leading to reduced sealing performance, wire aging, and the like.
Therefore, manufacturers should pay close attention to these issues in their own solutions. The light source module solution without heat dissipation, because the light source is protected in a complete body, without lenses, wires and the like directly exposed to the sunlight, the reliability of the design scheme is slightly better.
As the industry's highest specification and largest industry event in the LED industry, it is also the best platform for the annual LED industry's year-end review, analysis and outlook. So far, the high-tech LED conference has been successfully held for four sessions. The 5th High-tech LED Conference will also be held at the Guanlan Lake Dongguan Club in Shenzhen on December 12-13, 2014.
On the afternoon of December 13th, Mr. Mu Linsen’s “New LED for the Next Three Years†theme conference , Xu Min , technical director of Shanxi Guangyu, will analyze the advantages and disadvantages of various modularization solutions and discuss the same module. Please look forward to the various technical problems and solutions in the process of light source to diversified lamps .
Easy Electronic Technology Co.,Ltd , https://www.yxpcelectronicgroups.com