★ Although the open platform is good, easy to assemble, and open up at the same time, it is also very beautiful. However, the ashing problem is basically wiped once every few days. When I laze for a while, it becomes forced to die. The appearance of the disease. All right, change the chassis.
★ Solve the problem of falling gray, it still seems to be a relatively closed chassis, it is best able to hold my ATX motherboard, the volume should be as small as possible, allows me to minimize the dust inside the chassis, external dust is a good removal. Well, the final selection of Prieley P66E.
★Installation results preview ~~~~~~~~~~
★ P66 this chassis structure is good, but the most painful place is that it does not support the 14cm radiator cooling, but also to save money to buy accessories ....
★ Try changing the water again! Open platform can not play one water!
★ Before I saw the water-cooled evaluation of the next-door website, I said that this heat-dissipation capability is strong, there are many new technologies, and I bought it. . Master Liquid Pro has a long name, so call him the Chinese name Ice God II.
★ Backside multilingual parameters and features
★ The cool and cool boxes are very different and huge, but they are categorized inside for you. This OCD design is also unique. This kind of alternative packaging box causes players with a habit of collecting boxes to face the dilemma of how to collect the boxes.
★ Ice God II 240 cold row + cold head. Those hardware websites say that this cold row + cold head has been redesigned. I look first
★ A transparent cover of plexiglass was added on the top of the cold head. The logo is a must-have. There are blue LED lights inside, and you can also see some of the top structure of the cold head. The entire water-cooled head is relatively high and has a significant difference from other flat-type cold heads.
★ The reason I Baidu, anyway, is introduced by others, it looks like a very powerful look, must not expose the characteristics of my reading less. I will pretend to look around at the scenery.
★ There is a prominent pure copper base, compared with the next, almost as large as the CPU. The original intention of the design seems to be to make the CPU more closely with the cold head. It seems that I can't tighten the nut, otherwise I will make a miracle.
★The cold row of fins is redesigned with the fins in contact with the water pipe. The contact part of the impression is round, and now Ice God II is a square wave, so that the contact area is larger and the conduction heat is more and faster.
★ Ice God II's fan feels a lot in his hand. All four corners are wrapped with rubber cushions - the purpose is to absorb shock.
The fan is the traditional standard 9-blade fan - as far as I know, this kind of fan is the most balanced and there will be no obvious disadvantages.
★ The most special place for this fan is that you can determine the fan speed range yourself. The speed of the S-gear fan is 650-1300rpm, the fan speed is 650-2000rpm in the Q-gear, and the fan speed is 650-2500rpm in the P-gear and the middle one.
★ There is also a rubber cushion in the fitting, which is placed between the fan and the cold row when the fan is installed, as a further shock absorber. It seems that you can still wind the wind.
★ Accessories. It is still the kind of obsessive-compulsive disorder.
★ Hand tightening studs used to fasten fans and cold rows in accessories! It is more convenient to disassemble and install the fan.
★ If the cold head is fitted with a buckle, it is a complete body.
★ CPU is i7 6700, Jingdong purchased licensed. At present, it is sufficient to cope with the vast majority of situations. If there are flaws and shortcomings, the substrate is too thin.
★ Jingdong purchased the Bank of China Arsenal Z170-A. A fast-paced bios is more suitable for novices and veterans, but also can adjust the fan curve. Eh? You found out that I changed the motherboard. It was discovered by you.....
★ Zhiqi nickname sesame seeds, memory is the strength of sesame seeds. I will not tell you that soon after I bought memory, I began to madly increase the price.
★ The reason why I replaced the Z170-A for speeding is that I want to experience the strongest bios in the industry, and the non-K overclocking. Finally, I want to use DDR4 3000. The frequency of DDR4 2133 is too painful. The Chichi's TZ 3000 looks really pretty and the timing is quite low. Is a very good memory.
★ During the Mid-Autumn Festival, the RX480 and RX470, represented by Dylan and Sapphire, started a special sale. Sapphire - hard to protect, does not support personal insurance! It is difficult to protect the name of the universe. It's best to buy it at places like Tmall or JD.com that have a good warranty.
Of course....I was originally going to buy bad bottom. When I bought it, it was bad. Oh no, it was Dylan that was out of stock....
★ The power supply is XFX XTR 750, which is customized as a third-party black and white silver plated wire.
★ Primor P66E chassis, both sides of the cover are tempered glass, when dismantling, be extremely careful!
★ P66E is the size of ATX, but the overall feel is very small. Both sides are almost transparent. You can see this car model can be clearly displayed.
★ P66E left and right cover, as well as front panel and top panel are airtight. Except for the air vents on both sides and the fan position behind and PCI baffle vents, there is no air inlet and outlet. It can be said that the air duct is not ideal. God Ma you say the bottom? The bottom is divided by compartments. What do you want to do?
The large buttons on the top are the on and off buttons, and the small ones are the standard lighting buttons on the switch chassis. The chassis has 2USB3.0 in the sidebar and an external audio interface.
★ Separate compartments separate the main compartment from the power supply and the hard disk compartment. There is an LED inside the compartment, which can change color and emit light synchronously with the LED of the chassis. Of course, the hard disk drive is also inside, but only supports 23.5-inch hard disk drive rack
★ The power supply is designed for fast pumping. It is recommended to first install the module line and then stuff it in, otherwise your hands will challenge the nightmare difficulty.
★ The hard disk must be removed before the front panel can be loaded. Intel 520 240g Seagate SSHD 2T
★ After some arduous battles, I finally put the Argent dead Z170-A, which is almost the same as the reserved space of the chassis, and then loaded it into various accessories and plugged in the line. After the downline, everyone saw This refreshing appearance.
★I also tried turning the fan 180°. As a result, the fan was stuck. I only turned the rear 12025 fan into the chassis... But this way, I created the Sapphire RX480 8G. The heat is quickly discharged and will not accumulate in the chassis. Be a hit.
★ After the cover of the tempered glass side panel, you can see the internal accessories when there is sufficient lighting. However, the toughened glass has a very obvious disadvantage: the fingerprint collector. Tempered glass can be said to be a small reflection board.
★ P66E provides a warehouse for closing lines, plus a third-party custom module line, so that my back line has never been so refreshing ..... This is my most satisfied with a back line.
★ However, the side panel of the tempered glass covered on the other side was not seen, and it felt much lower.
★ P66E is to support the 10-color conversion Of course, do not want to automatically change the color, are to press the LED lights on the top of the chassis if they can automatically how good!
★ configuration as shown
★ In any case, no one looks at the test shots, but directly summarizes the table.
to sum up
With the chassis no longer afraid of falling, of course, must sacrifice thermal performance. If you want to have a good air duct, you need a hole-flow chassis - easy to get into the ash. Dust and heat dissipation are indispensable, unless dust-proof measures are taken. Dust nets will accumulate for a long time. It will be very disgusting if they are not cleaned. So to choose this, please think clearly before installing! Make a comprehensive assessment
Used PTX compact ATX, I suddenly found a small footprint! ! ! Basically closed chassis is also good, drink water, take a cup when passing can not be so careful! ! ! !
Integral water cooling can be said to turn the highly difficult split water into water cooling that allows many people to enjoy relatively easy installation. The Ice God II has a lot of new and interesting designs that theoretically can improve the heat dissipation performance. The Ice God II's fans must be very careful to only blow the cold row, not the air, or they will get stuck. As for the color matching, you have the ability to DIY! One of the inevitable shortcomings of the One Water is that the purchase cost is much higher than the air-cooled ones. The wires and interfaces that require external power supply will be more than one point.
RX480 8G heat power, performance enough to face 1080P with 1440p. But every time AMD drives off the chain, it takes more than half a year to really display the performance of the graphics card. Of course, at this stage, DX12 is an advantage project of the RX480. After all, the battlefield is with Civilization 6, and I look forward to it. 6 !
Third-party module line according to individual needs, after all, this is risky! And there is almost no gain for performance, buy a computer must be a good budget, know what you want is the most critical! When the budget is limited, priority is given to guaranteeing performance, heat dissipation, storage space, and peripherals, while focusing on performance balancing is the more correct choice.