Specification:
(2.9*300 MM);
(2.9*500 MM);
(2.9*800 MM);
(2.9*1000 MM);
Products are used in various kinds of infusion operation, such as infusion containers, infusion apparatus, infusion of connected;Can also be used to increase the infusion liquid filtration, dosing performance;Combination of infusion can increase perfusion tube length
Disposable extension tube is mainly composed of cases, the lock cover, taper joint, joint pressure cone, liquid filter, hose, stop the flow, injection parts, flow regulator and plug valves and needle parts matching.Ordinary liquid filter filter rate should accord with the requirement of GB8368, precision filter filter medium nominal diameter of 2.0 microns, 3.0 mu m or 5.0 mu m, should accord with the requirement of YY0286.1 filtering rate. *For injection or infusion infusion prolongs, using polymer manufacturing, as the standard interface, both ends of a single packaging, aseptic
Specification:
(2.9*300 MM);
(2.9*500 MM);
(2.9*800 MM);
(2.9*1000 MM);
Products are used in various kinds of infusion operation, such as infusion containers, infusion apparatus, infusion of connected;Can also be used to increase the infusion liquid filtration, dosing performance;Combination of infusion can increase perfusion tube length
Disposable extension tube is mainly composed of cases, the lock cover, taper joint, joint pressure cone, liquid filter, hose, stop the flow, injection parts, flow regulator and plug valves and needle parts matching.Ordinary liquid filter filter rate should accord with the requirement of GB8368, precision filter filter medium nominal diameter of 2.0 microns, 3.0 mu m or 5.0 mu m, should accord with the requirement of YY0286.1 filtering rate.
Vacuum fluorescent display, referred to as VFD, is a low-energy electroluminescent display devices, the working principle and CRT similar. It has the incomparable advantage of liquid crystal display (LCD) in applications where there is a large variation in ambient brightness and no strict requirement for low power consumption, and is now widely used in audio-visual equipment, home electronics, automotive instruments, office equipment and instrumentation.
The structure of a VFD board is a typical vacuum triode structure, consisting of a cathode, a grid and an anode. In between the cathode and the anode there's a thin mesh of metal called the Grid that can be switched on or off, controlling the flow of electrons from the cathode to the anode. This VFD grid mesh is made of a thin metal plate with a thickness of 30 to 50μm, which is lithographed and made into a highly transparent fine lattice or tortoise-shaped metal mesh. When a positive voltage is applied to the grid, electrons emitted from the filament are accelerated and diffused toward the anode. When a negative voltage is applied to the grid, electron flow to the anode is cut off.
We custom VFD Grid with drawings provided by customers. The raw material we use for etched VFD Grid is SUS430 stainless steel. We are equipped with professional metal etching equipment and exposure development equipment. Our etched manufacturing capacity can achieve 0.05mm.
Vacuum Fluorescent Display Grid,VFD Grid,Custom VFD Grid,Etched VFD Grid,VFD Grid Mesh
SHAOXING HUALI ELECTRONICS CO., LTD. , https://www.cnsxhuali.com