With the continuous improvement of people's living standards, plasma TVs are increasingly entering the family of ordinary consumers, but are some of the elements of plasma TV use clear? Let us take some precautions for the use of some plasma TVs.
First point: When using a plasma TV, do not cover plastic sheets, cloth covers, etc., do not pad foam at the bottom. So as not to affect the color TV ventilation, heat dissipation, if you need to cover, you should use anti-static cloth cover.
The second point: the color, volume, contrast, etc. of the plasma TV should be adjusted properly, so that the viewing effect is better and the energy saving effect can be achieved, and the service life of the TV can be extended.
Third point: When turning on the TV, you should first plug in the power plug and then turn on the power switch. It is not possible to switch the TV set by plugging and unplugging the power plug, because the current may be large at the moment when the power plug is plugged and unplugged, and such a large current is directly output to the TV, which may cause chip breakdown. In addition, it is not advisable to switch the TV frequently, and do not arbitrarily adjust the various buttons.
Fourth point: When watching the program normally and just shutting down, do not move and vibrate the TV to prevent damage to the TV. Regardless of the angle, the TV should avoid the sun exposure to avoid aging components or TV overheating.
Fifth point: When watching TV, you can open a small light to reduce eye fatigue, but do not turn on the fluorescent light to avoid interference with images and accompanying sounds. The height of the TV is best when it is flush with the eyes of the viewer. At the same time, the distance between the TV and the viewer is about 3 meters.
Sixth point: After watching the TV program, it is best not to use the remote control to shut down, to turn off the power on the TV. Because the remote control is turned off, the TV is in the standby state, and there is still current flowing inside. Although all the TVs currently indicate that the power is very small during standby, the long-term power supply of the internal components of the TV may cause premature aging, etc. unreasonable.
Seventh point: watching TV in summer should not be too long, generally not more than 3 hours, pay attention to prevent overheating inside the TV, otherwise it will easily cause TV components to age prematurely. Do not turn on the TV set from the outside in winter. It should be placed for about 2 hours to make the machine temperature and room temperature match before use to prevent condensation inside the machine.
Eighth point: It is best to turn off the TV in thunderstorms, unplug the antenna and the power plug to prevent lightning damage to the TV. If there is an outdoor antenna, ground the lightning protection line properly.
The ninth point: Pay attention to the matching of the antenna and the feeder to the plasma TV. The feeder has two kinds of 75 ohms and 300 ohms. It should be configured as required. Adjust the antenna or change the position of the TV when there is ghosting. With the continuous improvement of people's living standards, plasma TVs are increasingly entering the family of ordinary consumers, but are some of the elements of plasma TV use clear? Let us take some precautions for the use of some plasma TVs.
First point: When using a plasma TV, do not cover plastic sheets, cloth covers, etc., do not pad foam at the bottom. So as not to affect the color TV ventilation, heat dissipation, if you need to cover, you should use anti-static cloth cover.
The second point: the color, volume, contrast, etc. of the plasma TV should be adjusted properly, so that the viewing effect is better and the energy saving effect can be achieved, and the service life of the TV can be extended.
Third point: When turning on the TV, you should first plug in the power plug and then turn on the power switch. It is not possible to switch the TV set by plugging and unplugging the power plug, because the current may be large at the moment when the power plug is plugged and unplugged, and such a large current is directly output to the TV, which may cause chip breakdown. In addition, it is not advisable to switch the TV frequently, and do not arbitrarily adjust the various buttons.
Fourth point: When watching the program normally and just shutting down, do not move and vibrate the TV to prevent damage to the TV. Regardless of the angle, the TV should avoid the sun exposure to avoid aging components or TV overheating.
Fifth point: When watching TV, you can open a small light to reduce eye fatigue, but do not turn on the fluorescent light to avoid interference with images and accompanying sounds. The height of the TV is best when it is flush with the eyes of the viewer. At the same time, the distance between the TV and the viewer is about 3 meters.
Sixth point: After watching the TV program, it is best not to use the remote control to shut down, to turn off the power on the TV. Because the remote control is turned off, the TV is in the standby state, and there is still current flowing inside. Although all the TVs currently indicate that the power is very small during standby, the long-term power supply of the internal components of the TV may cause premature aging, etc. unreasonable.
Seventh point: watching TV in summer should not be too long, generally not more than 3 hours, pay attention to prevent overheating inside the TV, otherwise it will easily cause TV components to age prematurely. Do not turn on the TV set from the outside in winter. It should be placed for about 2 hours to make the machine temperature and room temperature match before use to prevent condensation inside the machine.
Eighth point: It is best to turn off the TV in thunderstorms, unplug the antenna and the power plug to prevent lightning damage to the TV. If there is an outdoor antenna, ground the lightning protection line properly.
The ninth point: Pay attention to the matching of the antenna and the feeder to the plasma TV. The feeder has two kinds of 75 ohms and 300 ohms. It should be configured as required. Adjust the antenna or change the position of the TV when there is ghosting. With the continuous improvement of people's living standards, plasma TVs are increasingly entering the family of ordinary consumers, but are some of the elements of plasma TV use clear? Let us take some precautions for the use of some plasma TVs.
First point: When using a plasma TV, do not cover plastic sheets, cloth covers, etc., do not pad foam at the bottom. So as not to affect the color TV ventilation, heat dissipation, if you need to cover, you should use anti-static cloth cover.
The second point: the color, volume, contrast, etc. of the plasma TV should be adjusted properly, so that the viewing effect is better and the energy saving effect can be achieved, and the service life of the TV can be extended.
Third point: When turning on the TV, you should first plug in the power plug and then turn on the power switch. It is not possible to switch the TV set by plugging and unplugging the power plug, because the current may be large at the moment when the power plug is plugged and unplugged, and such a large current is directly output to the TV, which may cause chip breakdown. In addition, it is not advisable to switch the TV frequently, and do not arbitrarily adjust the various buttons.
Fourth point: When watching the program normally and just shutting down, do not move and vibrate the TV to prevent damage to the TV. Regardless of the angle, the TV should avoid the sun exposure to avoid aging components or TV overheating.
Fifth point: When watching TV, you can open a small light to reduce eye fatigue, but do not turn on the fluorescent light to avoid interference with images and accompanying sounds. The height of the TV is best when it is flush with the eyes of the viewer. At the same time, the distance between the TV and the viewer is about 3 meters.
Sixth point: After watching the TV program, it is best not to use the remote control to shut down, to turn off the power on the TV. Because the remote control is turned off, the TV is in the standby state, and there is still current flowing inside. Although all the TVs currently indicate that the power is very small during standby, the long-term power supply of the internal components of the TV may cause premature aging, etc. unreasonable.
Seventh point: watching TV in summer should not be too long, generally not more than 3 hours, pay attention to prevent overheating inside the TV, otherwise it will easily cause TV components to age prematurely. Do not turn on the TV set from the outside in winter. It should be placed for about 2 hours to make the machine temperature and room temperature match before use to prevent condensation inside the machine.
Eighth point: It is best to turn off the TV in thunderstorms, unplug the antenna and the power plug to prevent lightning damage to the TV. If there is an outdoor antenna, ground the lightning protection line properly.
The ninth point: Pay attention to the matching of the antenna and the feeder to the plasma TV. The feeder has two kinds of 75 ohms and 300 ohms. It should be configured as required. Adjust the antenna or change the position of the TV when there is ghosting.
First point: When using a plasma TV, do not cover plastic sheets, cloth covers, etc., do not pad foam at the bottom. So as not to affect the color TV ventilation, heat dissipation, if you need to cover, you should use anti-static cloth cover.
The second point: the color, volume, contrast, etc. of the plasma TV should be adjusted properly, so that the viewing effect is better and the energy saving effect can be achieved, and the service life of the TV can be extended.
Third point: When turning on the TV, you should first plug in the power plug and then turn on the power switch. It is not possible to switch the TV set by plugging and unplugging the power plug, because the current may be large at the moment when the power plug is plugged and unplugged, and such a large current is directly output to the TV, which may cause chip breakdown. In addition, it is not advisable to switch the TV frequently, and do not arbitrarily adjust the various buttons.
Fourth point: When watching the program normally and just shutting down, do not move and vibrate the TV to prevent damage to the TV. Regardless of the angle, the TV should avoid the sun exposure to avoid aging components or TV overheating.
Fifth point: When watching TV, you can open a small light to reduce eye fatigue, but do not turn on the fluorescent light to avoid interference with images and accompanying sounds. The height of the TV is best when it is flush with the eyes of the viewer. At the same time, the distance between the TV and the viewer is about 3 meters.
Sixth point: After watching the TV program, it is best not to use the remote control to shut down, to turn off the power on the TV. Because the remote control is turned off, the TV is in the standby state, and there is still current flowing inside. Although all the TVs currently indicate that the power is very small during standby, the long-term power supply of the internal components of the TV may cause premature aging, etc. unreasonable.
Seventh point: watching TV in summer should not be too long, generally not more than 3 hours, pay attention to prevent overheating inside the TV, otherwise it will easily cause TV components to age prematurely. Do not turn on the TV set from the outside in winter. It should be placed for about 2 hours to make the machine temperature and room temperature match before use to prevent condensation inside the machine.
Eighth point: It is best to turn off the TV in thunderstorms, unplug the antenna and the power plug to prevent lightning damage to the TV. If there is an outdoor antenna, ground the lightning protection line properly.
The ninth point: Pay attention to the matching of the antenna and the feeder to the plasma TV. The feeder has two kinds of 75 ohms and 300 ohms. It should be configured as required. Adjust the antenna or change the position of the TV when there is ghosting. With the continuous improvement of people's living standards, plasma TVs are increasingly entering the family of ordinary consumers, but are some of the elements of plasma TV use clear? Let us take some precautions for the use of some plasma TVs.
First point: When using a plasma TV, do not cover plastic sheets, cloth covers, etc., do not pad foam at the bottom. So as not to affect the color TV ventilation, heat dissipation, if you need to cover, you should use anti-static cloth cover.
The second point: the color, volume, contrast, etc. of the plasma TV should be adjusted properly, so that the viewing effect is better and the energy saving effect can be achieved, and the service life of the TV can be extended.
Third point: When turning on the TV, you should first plug in the power plug and then turn on the power switch. It is not possible to switch the TV set by plugging and unplugging the power plug, because the current may be large at the moment when the power plug is plugged and unplugged, and such a large current is directly output to the TV, which may cause chip breakdown. In addition, it is not advisable to switch the TV frequently, and do not arbitrarily adjust the various buttons.
Fourth point: When watching the program normally and just shutting down, do not move and vibrate the TV to prevent damage to the TV. Regardless of the angle, the TV should avoid the sun exposure to avoid aging components or TV overheating.
Fifth point: When watching TV, you can open a small light to reduce eye fatigue, but do not turn on the fluorescent light to avoid interference with images and accompanying sounds. The height of the TV is best when it is flush with the eyes of the viewer. At the same time, the distance between the TV and the viewer is about 3 meters.
Sixth point: After watching the TV program, it is best not to use the remote control to shut down, to turn off the power on the TV. Because the remote control is turned off, the TV is in the standby state, and there is still current flowing inside. Although all the TVs currently indicate that the power is very small during standby, the long-term power supply of the internal components of the TV may cause premature aging, etc. unreasonable.
Seventh point: watching TV in summer should not be too long, generally not more than 3 hours, pay attention to prevent overheating inside the TV, otherwise it will easily cause TV components to age prematurely. Do not turn on the TV set from the outside in winter. It should be placed for about 2 hours to make the machine temperature and room temperature match before use to prevent condensation inside the machine.
Eighth point: It is best to turn off the TV in thunderstorms, unplug the antenna and the power plug to prevent lightning damage to the TV. If there is an outdoor antenna, ground the lightning protection line properly.
The ninth point: Pay attention to the matching of the antenna and the feeder to the plasma TV. The feeder has two kinds of 75 ohms and 300 ohms. It should be configured as required. Adjust the antenna or change the position of the TV when there is ghosting. With the continuous improvement of people's living standards, plasma TVs are increasingly entering the family of ordinary consumers, but are some of the elements of plasma TV use clear? Let us take some precautions for the use of some plasma TVs.
First point: When using a plasma TV, do not cover plastic sheets, cloth covers, etc., do not pad foam at the bottom. So as not to affect the color TV ventilation, heat dissipation, if you need to cover, you should use anti-static cloth cover.
The second point: the color, volume, contrast, etc. of the plasma TV should be adjusted properly, so that the viewing effect is better and the energy saving effect can be achieved, and the service life of the TV can be extended.
Third point: When turning on the TV, you should first plug in the power plug and then turn on the power switch. It is not possible to switch the TV set by plugging and unplugging the power plug, because the current may be large at the moment when the power plug is plugged and unplugged, and such a large current is directly output to the TV, which may cause chip breakdown. In addition, it is not advisable to switch the TV frequently, and do not arbitrarily adjust the various buttons.
Fourth point: When watching the program normally and just shutting down, do not move and vibrate the TV to prevent damage to the TV. Regardless of the angle, the TV should avoid the sun exposure to avoid aging components or TV overheating.
Fifth point: When watching TV, you can open a small light to reduce eye fatigue, but do not turn on the fluorescent light to avoid interference with images and accompanying sounds. The height of the TV is best when it is flush with the eyes of the viewer. At the same time, the distance between the TV and the viewer is about 3 meters.
Sixth point: After watching the TV program, it is best not to use the remote control to shut down, to turn off the power on the TV. Because the remote control is turned off, the TV is in the standby state, and there is still current flowing inside. Although all the TVs currently indicate that the power is very small during standby, the long-term power supply of the internal components of the TV may cause premature aging, etc. unreasonable.
Seventh point: watching TV in summer should not be too long, generally not more than 3 hours, pay attention to prevent overheating inside the TV, otherwise it will easily cause TV components to age prematurely. Do not turn on the TV set from the outside in winter. It should be placed for about 2 hours to make the machine temperature and room temperature match before use to prevent condensation inside the machine.
Eighth point: It is best to turn off the TV in thunderstorms, unplug the antenna and the power plug to prevent lightning damage to the TV. If there is an outdoor antenna, ground the lightning protection line properly.
The ninth point: Pay attention to the matching of the antenna and the feeder to the plasma TV. The feeder has two kinds of 75 ohms and 300 ohms. It should be configured as required. Adjust the antenna or change the position of the TV when there is ghosting.
ZGAR bar 600 Puffs
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
ZGAR bar 600 Puffs Disposable Vape, bar 600puffs,ZGAR bar 600 Puffs disposable,ZGAR bar 600 Puffs,ZGAR bar 600 Puffs OEM/ODM disposable vape pen atomizer Device E-cig
Zgar International (M) SDN BHD , https://www.zgarpods.com