Ice preparation tool <br> <br> appearance looks similar household fluorescent lamp, but usually we do not play as a fluorescent lamp light source, since the non-continuous fluorescent light, the color of the picture will generating white or yellow at the yellow The effect on white. To solve this trouble, you can use a continuous light source LED luminaire. The ice light is light and easy to carry, and it is quite flexible in the use of shooting. It can be used as apple light, hand-filled light or eye light...etc. Only the following materials, LED flashlights, PVC plastic tubes, PVC joints can be prepared, and ice lamps can be played without spending a lot of money!
tool:
LED flashlight, white PVC plastic tube (about 80cm), white PVC joint, plastic belt, saw, scissors, sandpaper, foil paper.
Production method Step1
First measure the length of the LED flashlight, cut half of the PVC plastic tube, let the flashlight can be put in, sanding the edge with sandpaper.
Step2
Then use the plastic belt to fix the LED flashlight.
Step3
Cut the PVC joint and draw 4 small pieces so that the joint can cover the PVC plastic tube, and then inside the PVC joint, insert it into the foil paper to make it reflect light.
Step4
After the combination is completed, the ice lamp can be used! If the inner wall of the PVC pipe is too smooth, according to the suggestion of POCOer, the white material is placed in the pipe, and the white material that can be transmitted through the pipe is covered. A thin white cloth or sulfuric acid paper turns the light into diffuse light, making the light more even and soft.
Shooting effect
LED flashlights cost about a hundred pieces, plus a few PVC plastic tubes, you can make lamps without spending a lot of money.
With global manufacturing standards and various certifications including CE, UL,FCC, TUV and SAA, our Led Driver products are sold in domestic market and are exported to various international markets including US, UK, France, Germany, Australia, Africa, Korea etc. We offer a wide range of LED lighting power solutions which includes Led Street Lighting or System, LED Lams, LED linear etc. At the same time Saving energy and Maximize beauty of your workplaace drive by our designing Switching Power Supply! Our Constant Current LED Lighting Power Supply range offers currents from 100mA to 8000mA; while the Constant Voltage LED Lighting Power Supply range starts at 12V going through to 48V.Both types of LED lighting power supply offer high efficiencies, PFC, are available with Class P Input; IP ratings against dust and moisture from IP20 through to IP67 and protection for short circuit, over voltage, overload and over temperature conditions. With additional options such adjustable outputs and PWM, 1-10V, Resistive or triac dimming functions.
100-240/277V IP65 Dimming Driver
General input driver, 0-10V dimming led driver, IP67 led driver, led power supply
ShenZhen Fahold Electronic Limited , https://www.fahold.com