The broadcasting and sound system covers a wide range, from shopping malls, schools, hotels, stations, terminals, squares to venues, theaters, stadiums, etc. are all closely related.
1.1 In civil construction engineering design, broadcasting systems can be divided into the following categories:
A. Public broadcasting systems for public areas (shopping malls, stations, terminals, shopping malls, restaurants, corridors, classrooms, etc.) and parking lots.
This type of system is mainly used for voice broadcasting, so clarity is paramount. Moreover, such systems often broadcast background music in peacetime, and can be converted to emergency broadcasts in the event of a disaster or emergency.
B. Broadcast audio system for hotel rooms.
Such systems include room audio broadcasts and emergency broadcasts, often delivered by bedside tables located in the guest rooms. The room broadcasts contain a number of freely selectable bands. In the case of emergency broadcasts, room broadcasts are automatically interrupted and automatically switched to emergency broadcasts.
C. Hall sound reinforcement system represented by auditorium, theater and gymnasium.
This is a professional sound reinforcement system, which not only considers electro-acoustic technology problems, but also involves architectural acoustics. Both of them must be balanced and not neglected. Such broadcast systems often have comprehensive multi-purpose requirements, which can be used not only for the sound reinforcement of the venue language, but also for the performances of the arts. For large-scale live sound systems, the electric power is low. Tens of thousands, more than tens of thousands of watts, it is necessary to use high-powered speakers and power amplifiers, in the system configuration and equipment selection have certain requirements, while paying attention to the load of the power line.
D. Broadcast audio system for conference rooms, lecture halls, etc.
Such systems are generally also systems that are set up for background music and emergency broadcasts provided by public broadcasts, but because of their particularity, conference broadcast systems are often set up separately in conference rooms and lecture halls. For higher requirements or international conference halls, special audiovisual systems such as simultaneous interpretation systems, conference voting systems, and large-screen projection televisions are also required.
As can be seen from the above, the broadcast audio systems for various buildings, hotels and other civil buildings can be basically classified into three types:
The first is the Public Address System (PA), which is a cable broadcast system, which includes background music and emergency broadcast functions. It is usually combined to play background music or other programs, and when an emergency such as a fire occurs, it is converted. Broadcast for the alarm. The microphone used for broadcasting in such a system is generally not in the same room as the speaker broadcasted to the public, so there is no problem of acoustic feedback, and the constant pressure transmission is a typical system; the second is the hall sound reinforcement system, such a system The use of professional audio equipment, and requires a high-powered speaker system and amplifier, because the microphone and the speaker for sound reinforcement are in the same hall, there is the problem of acoustic feedback and even howling, and because of the short distance, the system is generally The use of low-impedance direct transmission; the third is a dedicated conference system, although it is also a sound reinforcement system, but has its special requirements, like the sound interpretation system.
1.2 The composition of the broadcast audio system
No matter which kind of broadcast sound system, it can be basically divided into four parts: program source equipment, signal amplification and processing equipment, transmission line and speaker system.
Program source equipment: The program source is usually provided by radio broadcasting, laser phonograph and recording deck, in addition to microphones and electronic musical instruments.
Signal amplification and processing equipment: including mixers, preamplifiers, power amplifiers and various controllers and audio processing equipment. The primary task of this part of the equipment is signal amplification, followed by signal selection. The mixer and preamplifier are similar in function and status (of course, the mixer's functions and performance indicators are higher), their basic functions are to complete the signal selection and preamplification, in addition to the volume and sound effects for various Adjustment and control. In order to better perform frequency equalization and timbre beautification, the graphic equalizer is also separately input. This part is the "control center" of the entire broadcast sound system. The power amplifier amplifies the signal from the preamplifier or the mixer, and then pushes the speaker through the transmission line.
Although the transmission line is simple, it has different requirements depending on the system and the transmission method. For the auditorium, theater, etc., because the distance between the power amplifier and the speaker is not far, the direct feeding method of low resistance and large current is generally adopted, and the transmission line requires a dedicated speaker line. For the public broadcasting system, since the service area is wide and the distance is long, in order to reduce The loss caused by the transmission line often adopts a high-voltage transmission mode. Since the transmission current is small, the transmission line is not required to be high.
Speaker System: The speaker system requires the entire system to be matched, and the choice of its position should be realistic. Auditoriums, theaters, dance halls, sound quality, sound quality requirements, and speakers generally use high-power speakers; and public address systems, because it is not so high requirements for sound, generally use 3W? 6W ceiling speakers is good.
1.3 Characteristics of the broadcasting system
Background music referred to as BGM, is Back Ground
Music's abbreviation, its main function is to cover up the noise and create a relaxed and harmonious atmosphere. If the listener does not concentrate on listening, he can't distinguish the location of the sound source, and the volume is small. It is a kind of atmosphere that can create a relaxed and pleasant atmosphere. music.
Therefore, there are two effects of background music. One is to cover up the environmental noise psychologically, and the other is to create an atmosphere that suits the indoor environment. It is widely used in hotels, hotels, restaurants, shopping malls, hospitals, office buildings and so on. The music should be lyrical or relaxed, and the intense music is not appropriate.
Background music is not stereo, but mono music. This is because stereo requirements can distinguish the sound source orientation and have a sense of depth, while background music is not conscious to hear where the sound comes from, and does not want The location of the sound source is felt, and the sound source is required to be concealed, and the volume is lighter, so as not to affect the two people's opposite speech.
[7 Working Modes Flashlight]: Headlight (4-6hrs) -High, Medium and Flashing, Side White Lamp (4-7hrs) - High and Medium, Side Red Light (6-7hrs) - Flashing and Slow-flashing; Press the switch to change working mode and long press 3s to change working LED.Its beam can be focused that throws light up to an impressive 700 feet
[Car Emergency Escape Tool]: Features with window breaker break the stuck window and the seat belt cutter to cut the jammed seat belt; bring safe escape in emergencies, having a self defense Led Flashlight tactical can help you get out of most sticky situations
[HANDS-FREE]: With a powerful magnet on the side of the flashlight head, you could attach it to the car or other metallic surface to use as a Work Light, Camping Lamp or emergency warning light
[Reliable and Necessary]: Flashlight is water resistant & shock resistant for use under the most rugged, emergency condition.It comes with a weather resistant anodized aluminum alloy body, easy to grip, tail with a compass for outdoors; Not just for auto emergencies, also great for working, camping, or hiking as it's designed to withstand lots of abuse
[Rechargeable Emergency Power Bank]: This Solar Flashlight has a built-in 2000mAh 18650 battery, could be charged with included USB Cable (4-5hrs) or Solar Power (30hrs), using the USB cable to connect your phone with the flashlight (The battery needs to be greater than 20% )and charging your phone for emergency
Solar Flashlight
Solar Powered Flashlight,Solar Powered Torch,Solar Rechargeable Flashlight,Solar Rechargeable Torch
Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlight.com