※ The original intention of buying:
Due to work reasons, it is often necessary to stay in a place other than the unit for a whole day. Occasionally, a short trip (within 2 days) is required. When the mobile phone is working, it is a must-have camera tool and calculation work. Colleagues must also record the work. Some important information is considered heavy use. Therefore, charging treasure has become a necessary equipment to go out, but the drawbacks of charging treasure is also very obvious, can not use mobile phones with one hand in the event. So he began to look for a clip-on battery that could be mounted on a mobile phone, but many brands of products had a large chin before. It was really heavy and he gave up. Later, I saw this inadvertently in the push of a certain treasure, and it satisfies my aesthetic requirements and practical needs, so she decisively orders.
※ Unpacking and appearance:
· Packaging is very simple, battery capacity, applicable mobile phone size and other information is also clearly marked. The phone used is the iPhone 6SP.
·The back of the box is the installation instructions and precautions
· On the back of the product, the material is plastic, and the drawing lines are made. It should be to increase the texture of the material and increase the friction.
• The inner side of the product and the built-in installation instructions clearly require that when installing and disassembling, start from the head of the mobile phone, and the angle of opening and closing should not be too large.
The close-up of the lighting interface, without the disadvantage of a big chin, is that the connection of the socket will be relatively fragile, so be careful when inserting or unplugging it, otherwise it may cause damage to the interface, which is why the instructions and precautions are so simple. The reason why it appears again and again.
※ Installation and use
The installation is very simple, put the phone into the clipped battery from top to bottom, push the lighting interface of the mobile phone into, and then close the top on OK.
The following is the installed state
In general, the fit and tightness of the back clip battery is still very good, after installation is not very different from the ordinary mobile phone shell, but the weight and thickness. . . Well, obviously not a level.
※ Use experience and summary
Because it is used in normal work, there is no time for all-day testing. However, considering the use of the 3650MA battery, plus the battery of the mobile phone, it is very easy to use it for a whole day. Many times the battery is still half of the remaining power, moderate intensity of use, adhere to two days should not be a problem (have been playing the game to say the other).
Advantages: 1. No chin (for a long time to find this value is pretty good);
2. Good fit with mobile phones;
3. Adequate power, enough for continuous use throughout the day;
4. Weight balance, there is no top-heavy situation, does not affect the normal use of the phone position, one-handed use to get a little more force;
5 can be used with the car magnetic mobile phone holder, no need to install the patch.
Disadvantages: 1. General materials, especially the back of the fitting hand, the use of plastic material, if it is easy to sweat friends, use a period of time will feel that friction is not enough, a little slippery. This is a design problem, and its practical skin coating can be solved, but it may be costly.
2. The weight is relatively large. There are no specific weight parameters on the shop, but the weight increases significantly after installation. Women consumers are more prone to fatigue after a long time.
※ Recommended group:
From the point of view of personal experience, it is recommended to high-powered users of mobile phones for men (especially because of work or other reasons, it takes a long time to ride, move, and rarely have the opportunity to sit down and securely charge the mobile phone), although there are The female-specific pink color, but if it is not held in two hands, it is not recommended to buy, because it is a bit heavy.
Fiber optic transceivers usually have the following basic characteristics:
1. Provide ultra-low latency data transmission.
2. It is completely transparent to the network protocol.
3. A dedicated ASIC chip is used to realize data line-speed forwarding. Programmable ASIC concentrates multiple functions on one chip, and has the advantages of simple design, high reliability, and low power consumption, which can enable equipment to obtain higher performance and lower cost.
4. Rack-type equipment can provide hot-swappable functions for easy maintenance and uninterrupted upgrades.
5. The network management equipment can provide functions such as network diagnosis, upgrade, status report, abnormal situation report and control, and can provide a complete operation log and alarm log.
6. Most equipment adopts 1+1 power supply design, supports ultra-wide power supply voltage, and realizes power supply protection and automatic switching.
7. Support an ultra-wide operating temperature range.
8. Support complete transmission distance (0~120km).
10G Duplex Transeciver,Duplex Transeciver,Duplex Optical Transceiver,10G Duplex Transeciver For Sale
Nanjing Jisu Shitong Technology Co., Ltd , https://www.netairs.com