Material: 2 meters long 2.5-4mm single core copper wire, video cable, TV TV male, insulating tape
In the first step, the 2-meter-long 2.5-4mm single-core copper core wire is first stripped of the plastic skin, and the bare copper core wire helps to improve the television signal reception performance.
The second step, the stripped copper core wire according to Figure 1 fold shape, note that A, B can not be shorted two points, insulated by insulating tape, the actual effect shown in Figure 2.
The fourth step is to turn on the DTV or DTMB function of the TV and perform the tuning (which can also be automatically adjusted manually). If the signal is not good, the placement of the diamond antenna can be properly adjusted.
The PLC splitter is used to separate or combine optical signals. A PLC is a micro-optical component based on planar lightwave circuit technology and provides a low-cost light distribution solution with the small form factor and high reliability.
Rackmount Splitter is manufactured using silica glass waveguide circuits that are aligned with a v-groove fiber array chip that uses ribbon fiber. Once everything is aligned and bonded, it is then packaged inside a miniature housing. PLC splitter has high-quality performance, such as low insertion loss, low PDL, high return loss, etc.
Advantages
Suitable for multiple operating wavelengths (1260nm – 1650nm); unstinted.
Equal splitter ratios for all branches.
Compact configuration; smaller size; small occupation space.
Good stability across all ratios.
High quality; low failure rate.
Rackmount Splitter,Fiber Optical Splitter Rackmount,1U Rack Mount PLC Splitter,PLC Fiber Optical Splitter
Sijee Optical Communication Technology Co.,Ltd , https://www.sijee-optical.com