MOOTTL ultra high pressure manual pump maintenance method:
1. The components of the two-way manual oil pump should be clean, and there should be no dust or dirt around the valves and the plunger.
2. Strictly follow the instructions for use.
3. The working fluid has an active viscosity of 20--28 centistokes, such as YB--N32 hydraulic oil. It is strictly forbidden to use alcohol, water, glycerin, sesame oil, brake fluid, general hair oil as working fluid.
4, the working fluid must be cleaned with a 120--160 mesh oil filter.
5, should be handled with care, no bumps. The pressure bar should be tightened to avoid damage to the thread.
6. When not in use, the non-painting name is coated with a layer of petroleum jelly to prevent rust.
7. When not in use, it should be packed in a box and stored in a dry, temperature-friendly room.
8, special attention, long-term use of hose, prone to aging, so that the strength is reduced, should be reviewed on a regular basis.
P01 Series Push Wire Connectors,Push Wire Connectors 3 Poles,2 Conductor Connector,Wire Connectors 8 Way