Cement free calcium oxide meter operation - Database & Sql Blog Articles

Probe domestic high current needle 150 head diameter 3.0 thread needle high current needle total

MOS power IC full range

AVX tantalum capacitor muddy NOJC227M006RWJ original spot

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Operation of cement free calcium oxide meter

:

For you to briefly introduce the operation of cement free calcium oxide,

The operation is simple and convenient to use, and the instructions for use are as follows:

1

When using this instrument, the instrument should be leveled.

2

Before placing the conical flask, push the movable rod upwards by hand, then place the conical flask on the hob, then slowly move the hand down. The condenser should be connected to the conical flask.

3

The water in the bucket should reach three quarters

1500ml (

Put the bucket in the instrument, add water to the bucket, first use the screwdriver to unscrew the screw, open the upper half of the instrument, add water to the bucket, and then install the back cover.

)

.

4

After turning on the power, if you want to preheat, stir, and cool, you can press directly.

[

heating

]

key,

[

Stir

]

key,

[

cool down

]

Key, if you want to go to automatic, you must first set the running time, then press

[

start up

/

stop

]

key.